KYN61-40.5 Metal-clad Movable Switchgear

KYN61-40.5 (Z) type armored movable AC metal enclosed switchgear (hereinafter referred to as "switchgear") is suitable for three-phase AC 50Hz power systems, used for receiving and distributing electrical energy in power plants, substations, and distribution rooms of industrial and mining enterprises, and for controlling, protecting, and monitoring chttp://www.cnbeiqiang.com/static/upload/image/20240303/1709452243807844.jpgircuits

KYN61-40.5 Metal-clad Movable Switchgear

Inquire NOW PDF

Product Profile

◆Product Summary

KYN28A-24 indoor metal-clad movable switchgear is a complete power distribution device for 3.6kV~24kV,3 phase AC 50/60Hz,single bus sectionalized system.It is mainly used for power transmission of middle/small generators in power plants,power receiving,transmission for substations in power distribution and power system of factories,mines and enterprises,and starting of large high-voltagemotor etc.,so as to control,protect and monitor the system.It complies with GB/T11022,GB/T3906,DL/T404 and other relativestandards.It has functions of preventing to push or pull the breaker's handcart with load,breaker's mistakenly open or close,shutoff the breaker when the grounding switch is on the position of close,enter into a electriferous compartment,mistakenly close theinterlock function of the grounding switch when it is electriferous.It can be used with domestic VCA and VS1 vacuum circuit breaker,itcan be used with VD4 from ABB and EV12S from Schneider.

◆Environmental Conditions

1.Ambient Temperature:No more than +40℃ and no less than -15℃.Average temperature is no more than +35℃ within 24 hours.

2.Altitude:No more than 1000m.

3.Relative Humidity:the average daily value is no more than 95%,the average monthly value is no more than 90%.

4.Earthquake Intensity;No more than 8 degrees.

5.Vapor pressure:average daily value is no more than 2.2kPa,average monthly value is no more than 1.8kPa.

6.Installation locations without fire,explosion danger,serious pollution,chemical corrosion and violent vibration.

◆Product Features

1.The cabinets and partition board adopting hot-dip Al-Zn alloy-coated steel sheet and frame adopting assembled structure makehigh overall intensity and good earth continuity.

2.The cabinet is combined type and the handcart of breaker is floor structure type.

3.The new composite insulating vacuum circuit breaker has the characteristics of interchangeability and simple replacement.

4.The handcart adopts screw propulsion mechanism,which moves the handcart easily and prevent mis-operation to damage thepropulsion mechanism.

5.All the operations could be done when the cabinet door is closed.

6.The interlocking between the main switch,the handcart and the switch cabinet adopts the mandatory mechanism of mechanicallocking,meeting the functions of five-preventions.

7.The cable room is spacious and can be connected to a number of cables.

8.The degrees of protection is IP4X,which effectively prevents the equipment from being invaded by sundries and insect pests.

9.The product runs safely and reliably through the harsh condensation,filth and internal arc tolerance test.

◆Technical Parameters
Sr. ContentUnitValue
1Rated VoltagekV40.5
2Rated CurrentA630/1250/1600/2000/2500
3Rated FrequencyHz50/60
4Power Frequency Withstand Voltage in 1 min    Phase,EarthedkV95
    solating FracturekV110
5Lightning Impulse Withstand Voltage(Peak)    Phase,EarthedkV185
    solating FracturekV215
6Rated Current of the Main BusbarA630/1250/1600/2000/2500
7Rated Current of the Branch BusbarA630/1250/1600/2000/2500
8Rated Short-circuit Breaking CurrentkA20/25/31.5
9Rated Short-time Withstand Current(4s)kA20/25/31.5
10Rated Peak Withstand CurrentkA50/63/80
11Rated Short Circuit Making CurrentkA50/63/80
12Frequency Withstand Voltage in 1 min of Aux Control LoopV200
13Internal Arc Duration Test(0.5s)kA31.5
14Degrees of ProtectionIPIP4X(IP2X when the front door is opened)
15Rated Voltage of Aux Control LoopVAC or DC 110/220

3.jpg

Product Profile

◆Product Summary

KYN28A-24 indoor metal-clad movable switchgear is a complete power distribution device for 3.6kV~24kV,3 phase AC 50/60Hz,single bus sectionalized system.It is mainly used for power transmission of middle/small generators in power plants,power receiving,transmission for substations in power distribution and power system of factories,mines and enterprises,and starting of large high-voltagemotor etc.,so as to control,protect and monitor the system.It complies with GB/T11022,GB/T3906,DL/T404 and other relativestandards.It has functions of preventing to push or pull the breaker's handcart with load,breaker's mistakenly open or close,shutoff the breaker when the grounding switch is on the position of close,enter into a electriferous compartment,mistakenly close theinterlock function of the grounding switch when it is electriferous.It can be used with domestic VCA and VS1 vacuum circuit breaker,itcan be used with VD4 from ABB and EV12S from Schneider.

◆Environmental Conditions

1.Ambient Temperature:No more than +40℃ and no less than -15℃.Average temperature is no more than +35℃ within 24 hours.

2.Altitude:No more than 1000m.

3.Relative Humidity:the average daily value is no more than 95%,the average monthly value is no more than 90%.

4.Earthquake Intensity;No more than 8 degrees.

5.Vapor pressure:average daily value is no more than 2.2kPa,average monthly value is no more than 1.8kPa.

6.Installation locations without fire,explosion danger,serious pollution,chemical corrosion and violent vibration.

◆Product Features

1.The cabinets and partition board adopting hot-dip Al-Zn alloy-coated steel sheet and frame adopting assembled structure makehigh overall intensity and good earth continuity.

2.The cabinet is combined type and the handcart of breaker is floor structure type.

3.The new composite insulating vacuum circuit breaker has the characteristics of interchangeability and simple replacement.

4.The handcart adopts screw propulsion mechanism,which moves the handcart easily and prevent mis-operation to damage thepropulsion mechanism.

5.All the operations could be done when the cabinet door is closed.

6.The interlocking between the main switch,the handcart and the switch cabinet adopts the mandatory mechanism of mechanicallocking,meeting the functions of five-preventions.

7.The cable room is spacious and can be connected to a number of cables.

8.The degrees of protection is IP4X,which effectively prevents the equipment from being invaded by sundries and insect pests.

9.The product runs safely and reliably through the harsh condensation,filth and internal arc tolerance test.

◆Technical Parameters
Sr. ContentUnitValue
1Rated VoltagekV40.5
2Rated CurrentA630/1250/1600/2000/2500
3Rated FrequencyHz50/60
4Power Frequency Withstand Voltage in 1 min    Phase,EarthedkV95
    solating FracturekV110
5Lightning Impulse Withstand Voltage(Peak)    Phase,EarthedkV185
    solating FracturekV215
6Rated Current of the Main BusbarA630/1250/1600/2000/2500
7Rated Current of the Branch BusbarA630/1250/1600/2000/2500
8Rated Short-circuit Breaking CurrentkA20/25/31.5
9Rated Short-time Withstand Current(4s)kA20/25/31.5
10Rated Peak Withstand CurrentkA50/63/80
11Rated Short Circuit Making CurrentkA50/63/80
12Frequency Withstand Voltage in 1 min of Aux Control LoopV200
13Internal Arc Duration Test(0.5s)kA31.5
14Degrees of ProtectionIPIP4X(IP2X when the front door is opened)
15Rated Voltage of Aux Control LoopVAC or DC 110/220

3.jpg

Get in Touch

×